Loading...
Australias largest range of sensor operated taps and urinal flush valves

ET2-SE Sensor Eye - Turn a Spout into a Sensor Tap


[Contact us for a price]

AUTOMATIC SENSOR ‘EYE’ ET2-SE

6 Star WELS - 4.5l per minute #ET2-SE DC - battery operated
#ET2-SE AC/DC - mains power with battery back-up

A simple and very neat, wall-mounted infra-red sensor eye with solenoid that will adapt any tap spout into a hands-free sensor tap. Ideal for retrofit, it is a cost-effective and flexible option.

Install in-wall with one of our spouts (ET2-SP1 or ET2-SP2) to achieve the 6-Star WELS rating, or use any simple spout of your choice to give you optimal design freedom. You will still save water thanks to Enviro-Tech's water-saving technology. There is no set run-time, it is simply; hands in sensor field 'water on', remove hands 'water off'.

The Sensor Eye is vandal and tamper-resistant making it suitable for all environments. Can be used with bench, basin or wall-mounted spouts and is also suitable for stainless steel troughs. Ideal for use in schools, kindergartens, commercial bathrooms, industrial and public sectors.

Features

  • Hygienic ‘no-touch’ operation
  • Automatic shut off after one minute if sensor is obstructed
  • Low energy consumption and long-life batteries; allow use for up to 110,000 cycles
  • Remote control to adjust sensor distance (available separately if needed on installation)

Enviro-Tech watermark

Technical Parameters

  • Water Pressure 100kPa - 500kPa
  • Water temperature 1-50ºC
  • DC 6V (4 x AA batteries)
  • Mains power transformer option available
  • Power consumption static <0.3MW
  • Water inlet 15mm ½” G
  • Confirmation time 1-2 Seconds
  • Detection range 10-40CM

SPECIFICATION SUMMARY

Specification Summary ET2-SE Sensor Eye

TECHNICAL DRAWING

INSTALLATION INSTRUCTIONS