Loading...
Australias largest range of sensor operated taps and urinal flush valves
ET2-30.5 Classic r Spout Sensor Tap
ET2-30.5 Classic r Spout Sensor TapET2-30.5 r Spout tapET2-30.5 Sensor r spout

ET2-30.5 Classic 'r' Shaped Sensor Tap


[Contact us for a price]

AUTOMATIC SENSOR TAP ET2-30.5

6 Star WELS - 4.5l per minute# ET2-30.5DC (battery only)
# ET2-30.5AC/DC (mains power with battery back up)

A medium height pillar design sensor tap, a simple but elegant 'r' shaped spout suitable for bench/deck mount with partially raised basins or can be basin mounted if required.

This sensor tap has a forward-facing sensor and is suitable for use in any Commercial bathroom. A popular model used in offices, medical/dental rooms and shopping malls. Highly suitable for all Accessible Bathrooms and for use in aged care facilities.

Should not be overlooked as an option for the Residential bathroom, this sensor tap is a classic design that would work extremely well in the home where a traditional style is preferred.

There is no set runtime for any of the Enviro-Tech sensor tap range, it is just; hands in sensor field 'water on', then remove hands 'water off'. This offers the maximum water savings and eliminates the risk of flooded bathrooms, as tap will automatically shut off after 1 minute should the sensor be obstructed.

Features

  • Pillar 'r' shaped spout design
  • Solid brass construction
  • Polished Chrome finish
  • Front facing sensor window
  • Low energy consumption - when using long life batteries, expect up to 110,000 cycles with normal use. Approximately 12-18 months.
  • Installing batteries, even when using the transformer, will ensure activation in the event of a power cut
  • Hands-free infrared activation
  • Automatic shut off after 60 seconds if the sensor becomes obstructed
  • Up to 70% water savings
  • AS/NZS 3718:2005
  • 6 Star WELS water rating

Enviro-Tech watermark

Technical Parameters

  • Water pressure 100kPa - 500kPa
  • Single feed water supply
  • Installation of (ET-HCV) isolating mixing valve recommended
  • DC6V 4 x AA batteries or mains power with battery back-up
  • Power consumption static ≤0.5W (DC), ≤ 3W (AC); standby 0.003W
  • Water temperature 1-50ºC
  • Water inlet 15mm G ½ “
  • Respond time 1-2 Seconds
  • Self-adjusting Sensor
  • IP54

SPECIFICATION SUMMARY

Specification Summary ET2-30.5 Sensor Tap

TECHNICAL DRAWINGS

Technical Drawing ET2-30.5 Sensor Tap Technical Drawing ET2-30.5 Sensor Tap Technical Drawing ET2-30.5 Sensor Tap Technical Drawing ET2-30.5 Sensor Tap Technical Drawing ET2-30.5 Sensor Tap

INSTALLATION INSTRUCTIONS

Installation Manual ET2-30.5 Sensor Tap